Knowledge Base:

You are here: Knowledge Base : gm	Page of 1

OUC 2011+ model years are dealer program only! If your vehicle will not enter programming mode confirm you do not have a check engine or tire pressure warning on. Any warning LHJ MYT Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the 512 You must have one (1) factory key that can start the vehicle to perform this procedure. If you do not have one (1) factory key for the vehicle currently, a trip to a dealership or an au RS3 To program (add) a remote control to the system: 1: Insert the key into the ignition switch and turn it to on. 2: Press and hold the ECU's programming switch for 3 seconds. The